Doc #: 60-00118 Rev. A
22
Initial Login
The first time the device is used, an individual designated as an administrator should log in using
the following User ID and Password:
•
Default username: admin
•
Default password: password
The user will then be asked to change the password. This new password will be the primary
administrator’s password.
Display Options
There are four options for the Exam Display. Select the preferred option:
1. Spectrogram on the top, M-mode on the bottom,
2. M-mode on the top, spectrogram on the bottom,
3. Spectrogram only, or
4. M-mode only
Settings
–
Exam
–
Exam Layout
Select the M-mode preferred M-mode option
:
1. Y-axis increasing in value, or
2. Y-axis decreasing in value
Settings
–
Exam
–
Invert M-Mode
Report Heading
A header for reports can be created as a portable network graphic (PNG) and entered at:
Settings
–
Regional
–
Logo Image File
Custom Protocols
Protocols can be customized for Complete and Limited exams. Users can select the desired
vessel sequence for the exam, define the starting depth and power for each vessel.
