Switching Between Shimmer and Reverb-Only
Using the footswitch, you may select between reverb-only and shimmer
reverb:
A short press (less than ½ second) enables or bypasses the effect—both
reverb and shimmer.
A long press (greater than ½ second) enables or bypasses the shimmer
only, whether or not the effect is currently bypassed.
The LED indicates the current mode as follows:
LED
Effect
Bypass
constant off
reverb
bypassed
constant on
reverb
enabled
short pulse
shimmer
bypassed
long pulse
shimmer
enabled
When the shimmer effect is disabled (reverb-only mode), the Shim knob is
also disabled.
Specifications
E
LECTRICAL
Nominal Input Level, Mix < 60%
+4 dBu, line level
Nominal Input Level, Mix > 60%
-10 dBV, instrument level
Input Impedance
1 MΩ
Output Impedance
1 kΩ
Gain, enabled vs. bypass
+/-0.5 dB (dry signal only)
Frequency Response
20Hz—20kHz, +0.1dB, -0.5dB
(dry signal or bypassed)
Total Harmonic Distortion
< 0.0015 % (typical, dry/bypassed signal,
22Hz—22kHz, 1.0 V
RMS
, 1 kHz)
Signal-to-Noise Ratio
109 dB, dry/bypassed signal (typical, A-weighted)
100 dB, Mix @ 50% (typical, A-weighted)
P
OWER
Power Adapter Input
9-12 V DC, 80 mA buffered, 95 mA true bypass
plug: center-negative, 5.5 mm OD x 2.1 mm ID
P
HYSICAL
Dimensions
2.9" W, 4.6" L, 2.0" H / 73 mm W, 117 mm L, 51 mm H
Weight
7.0 oz / 200 g
*Specifications subject to change without notice.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Warning:
This product contains no user-serviceable parts. Opening the pedal may
expose sensitive components to electro-static discharge, resulting in permanent
damage. Please do not remove the bottom cover or otherwise disassemble the pedal.
© 2014-2016 Neunaber Technology, LLC. All rights reserved. Neunaber logo and
Seraphim™ are trademarks of Neunaber Technology, LLC.
