Spate cleaner TANKO-SF
26/63
Translation of the original Operating / Installation Instructions 2016/09 Rev.1
5 Installation
Dimensions
Picture 5.2-2: Dimensions
Connection for
Pipe acc. to
DIN 11866
Article No.
DN
(mm)
RD
ø
(mm)
s
(mm)
KD
ø
(mm)
H
(mm)
h1
(mm)
h2
(mm)
d
ø
(mm)
Clipon Series A
(DIN)
665F441A16230
15
19.3
—
35
70
16
8
3.2
Clipon Series B
(ISO)
665F477A16230
15
21.6
—
35
70
16
8
3.2
Clipon Series C
(ASME)
665F490A16230
15
19.3
—
35
70
16
8
3.2
Weldon Series A
(DIN)
665F442A16630
20
23
1.5
35
70
17
—
—
Weldon Series C
(ASME)
665F491A16630
20
25.4
(1")
1.65
35
70
17
—
—
Table 5.2-2: Assignments of Dimensions
5.2.2
Installation Position
The device is designed for vertical installation, downward suspension or standing upwards, as the
preferred position. In the event of a different installation position, observe the following:
–
The angle of deviation from the vertical should not exceed 25° in order to ensure the functioning of
the device's self-cleaning feature. No compete cleaning is ensured when in standing upwards position
–
The running performance may be compromised.
–
The service life of the bearing elements may be shortened as a result of the increased strain.
–
Maintenance intervals should be shortened if necessary (see
section 7.4.1 Maintenance
