NetworX NX-507E, Installation And Startup Manual

Page: 14 / 26

14
NX-507E / NX-508E AUXILIARY MODULES
XII.
PROGRAMMING WORKSHEETS
(Defaults are printed in bold Italics text.)
LOC PG DESCRIPTION DEFAULT DATA
0 9 Output 1 Event, Zone, Time 43 1 10 _ _ _
Output 1 Special Functions, Partition
Segment 1 Segment 2
1 9
1 = "On" if output should time in minutes; "Off" if output
times in seconds
2 = "On" if output should latch until a code is entered
3 = "On" if output should reset if a code is entered
while it is being timed
4 = "On" if output should only trigger during a closed
schedule
5 = "On" if output should only trigger during an open
schedule
6 = "On" if the output should be inverted
7 = "On" if a trigger should be logged in event buffer
1 = Partition 1
2 = Partition 2
3 = Partition 3
4 = Partition 4
5 = Partition 5
6 = Partition 6
7 = Partition 7
8 = Partition 8
Output 1 Schedule 2 10
1 = Schedule 1
2 = Schedule 2
3 = Schedule 3
4 = Schedule 4 5 = Schedule 5
6 = Schedule 6
7 = Schedule 7
8 = Schedule 8
3 Output 1 X-10 Address
Segment 1 Module Number
0
10
Segment 2 House Code
0
4 10 Output 2 Event, Zone, Time
43 2 10
_ _ _
X-10 ADDRESS CODES
0=A 4=E 8=I 12=M
1=B 5=F 9=J 13=N
2=C 6=G 10=K 14=O
3=D 7=H 11=L 15=P
Output 2 Special Functions, Partition
Segment 1 Segment 2
5 10
1 = "On" if output should time in minutes; "Off" if output
times in seconds
1 = Partition 1
2 = Partition 2
2 = "On" if output should latch until a code is entered
3 = Partition 3
3 = "On" if output should reset if a code is entered
while it is being timed
4 = Partition 4
5 = Partition 5
4 = "On" if output should only trigger during a closed
schedule
6 = Partition 6
7 = Partition 7
5 = "On" if output should only trigger during an open
schedule
8 = Partition 8
6 = "On" if the output should be inverted
7 = "On" if a trigger should be logged in event buffer