Network Technologies Incorporated ST-IPHD-POELC-V4, Installation And Operation Manual, Page: 5 / 15

NTI XTENDEX Low-Cost HDMI Over Gigabit IP Extender with IR and POE
2
MATERIALS
Materials supplied with this kit
:

NTI XTENDEX
ST-IPHD-POELC-V4
Local and Remote Unit

URL slip with path to this manual

IR-EMITTER with 42.5" (1080mm) cable

IR-RECEIVER with 40" (1015mm) cable
-OR-

NTI XTENDEX ST-IPHD- R -POELC-V4 Remote Unit only

URL slip with path to this manual

IR-RECEIVER with 40" (1015mm) cable
Additional materials may be required but are not supplied:

CAT5e solid/stranded UTP ; 6/6a solid UTP; CAT7 solid STP (CATx) twisted-pair cables for TIA/EIA-568B wiring
terminated with standard RJ45 connectors wired straight thru- pin 1 to pin 1, etc.

HDMI male-male cable to connect a HDMI source or display (Order NTI # HD-xx-MM where xx=3, 6,10,15,25,30 and
50 foot cable).

Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet.
(xx- 20,25,30,40,50,60,75 and 100 Feet)

Use DP-HD-xx-MM cables to connect a DisplayPort source up to 15 feet away from the transmitter. (xx= 3,6,10 and 15
Feet)

Use DVI-HD-xx-MM cable to connect a DVI source up to 5 meters. (xx- 1,2,3 and 5 meters)
Optional
PWR-SPLY-IPHDPOELCV4 110-240VAC, 50 or 60Hz-5VDC/3A AC Adapter with Line cord, country-specific
Cables and power supply can be purchased from Network Technologies Inc by calling (800) 742-8324 (800-RGB-TECH) in the
US and Canada or (330) 562-7070 (worldwide).