NTI XTENDEX Low-Cost HDMI Over Gigabit IP Extender with IR and POE
11
TECHNICAL SPECIFICATIONS
Local Unit
Ports
1- HDMI-A Female (Video source)
1- RJ45 Female, 1000Mbps (CATx connection)
1- 3.5mm Female (IR Emitter)
Encoding Delay
80 ms latency
Remote Unit
Ports
1- HDMI-A Female (Display)
1- RJ45 Female, 1000Mbps (CATx connection)
1- 3.5mm Female (IR Receiver)
Audio Supported
Embedded Digital Audio through HDMI compatible TVs or audio receivers.
HDCP Supported
V1.4
General
Operating Temperature
32 to 140
°
F (0 to 60
°
C)
Storage Temperature
-4 to 158
°
F (-20 to 70
°
C)
Operating and storage
relative humidity
0 to 95% non-condensing RH
Resolutions Supported
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz
IR Frequency Range
20 to 60 kHz
HDCP Supported
V1.4
HDMI Supported
V1.4
CATx cable supported
CATx solid or stranded straight through cable for TIA/EIA-568B wiring terminated with standard
RJ45 connectors.
394 feet (120 meters) over CAT6/6a/7 cable
328 feet (100 meters) over CAT5e cable.
Cascading supported
Up to 3 switches- max cable length between the first switch/transmitter and the last switch/receiver
is 1,575 feet (480 meters) for CAT6/6a/7 or 1,312 feet (400 meters) for CAT5e cables
Multiple Transmitter
supported
Requires managed network switch with VLAN support. Managed switch must support port-based
IEEE 802.1Q VLAN.
Local and Remote Units must be on same LAN. WAN not supported.
Ethernet connection
1000 Base-T
EDID Built-in
Table
Power Supply
Power over Ethernet: With a switch that supports Power over Ethernet (Local: 4.5W, Remote:
3.5W)
OR
PWR-SPLY-IPHDPOELCV4: Output: 5VDC, 3.0A
Size (WxDxH)
4.44x3.71x0.94 In. (113x94x24 mm)
Approvals
CE, FCC, RoHS