102 | GigaStor™ (pub. 25.Apr.2014)
Figure 26: L-bracket Cabinet with U-extension
Installing the drives in your GigaStor
Follow these instructions to install the drives correctly before starting the probe. Failure to install the drives in
the proper location will result in poor read/write performance until the RAID array volume is rebuilt.
Stickers on each drive identify which slot it should be installed in. The drive labeled A1 must be installed in the upper
left slot of the GigaStor.
1. Make sure that the GigaStor is turned off.
2. Locate the drives that comprise the array. The drives are labeled to show you where they should be installed
in the drive cage. (
Image may not exactly match your product.
)
