background image

Wireless-B Broadband Router

Chapter 1: Introduction

The Wireless Router lets you securely share your DSL or Cable Modem
Internet connection with all the computers in the house, both wireless and
wired.  You can connect four computers directly to the Router by Ethernet
cables, and daisy-chain out to more hubs and switches to create as big a net-
work as you need.

Or, use the Router's built-in Wireless Access Point to connect your PC to the
network without stringing any wires.  Just plug a wireless network adapter into
your notebook through a PC Card slot, and you're ready to go.  Wireless net-
working doesn't get any easier.

Of course, you can connect more computers to the Router and your high-speed
Internet link -- just provide a wired or wireless network adapter for each one.
And once your computers are connected to the Router, they can communicate
with each other too, sharing resources like printers and all kinds of files --
music, digital pictures, and documents.  

To protect your data and privacy, all wireless communications can be protect-
ed by 128-bit encryption, while the Router helps keep Internet intruders out of
your computers.  It's all easier than you think -- the included Setup Wizards
walk you through configuring the Router, step by step.

With the Wireless-B Broadband Router, you're ready to start sharing printers,
files, and your Internet connection, the easy way.

11 Mbps High-Speed Data Transfer Rate with Automatic Fallback

Plug-and-Play Operation Provides Easy Setup

802.11b, DSSS, 2.4GHz-Compliant

Supports up to 128-bit WEP Encryption Security

Compatible with Virtually All Major Network Operating Systems

Free Driver Upgrades via Web

Remote administration and upgrade feature

Integrated Equalizer Recovers Weak Signals and Enhances Sensitivity

Sturdy Metal Design with Integrated Antenna

Works with All Standard Internet Applications

Clear Channel Assessment Increases Network Throughput

Hardware Buffer Chaining Provides High Performance While Reading and
Writing Buffers

The Wireless Broadband Router

Features

Network Everywhere

®

Series

Appendix A: Troubleshooting 

45

Common Problems and Solutions

45

Frequently Asked Questions

57

Appendix B: How to Ping Your ISP’s E-mail and Web Addresses  63

Appendix C: Configuring Wireless Security 

66

Configuring Wireless Security in Windows XP

69

Appendix D: Finding the MAC Address
and IP Address for Your Ethernet Adapter

74

Appendix E: Glossary 

78

Appendix F: Specifications

87

Environmental 87

Appendix G: Warranty Information

88

Appendix H: Contact Information

89

1

Summary of Contents for WR214E


























Reviews: