Network Computing Devices NCDware, User Manual

Page: 4 / 23

3
This release supports
NCD
ware on a WinCenter server running
WinFrame 1.6 or later.
NCD
ware is provided on
CD-ROM
and
PCMCIA
cards.
Installing NCDware on UNIX Systems
The procedure in this section describes how to install
NCD
ware on
the host and configure terminals to be used on the network.
For information on modifying or removing terminals from the
network, see the System Administrator’s Guide for UNIX Systems.
ncdinstall
installs
NCD
ware and configures terminals on most
UNIX
systems.
Note
If you are not sure if you can use
ncdinstall
on your
UNIX
host, follow the installation instructions from Step 1
beginning on page 6 through Step 6 on page 8. After you
complete Step 7, a message displays if
ncdinstall
cannot run
on your system. For information about manual installation,
call
NCD
Technical Support.
ncdinstall
performs the following:
❏ Examines the host system to ensure sufficient disk space. For
information on space requirements, see the Release Notes or the
file
SIZES
on the
CD-ROM
.
❏ Examines the host system to ensure that required
communication and login software is running. If requested, the
installation program enables the software.