NetVu FireVu Standalone Installation Manual Download Page 58 | Manualshive

Page: 58 / 97

background image

Page 58 of 97

Title FireVu Detector Standalone Installation Manual

NetVu Ltd.

www.netvu.org.uk

No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB

TCP Reassembly Queue Limit: This limits the maximum number of TCP segments that can be in the
reassembly queue, to prevent a common DoS attack.
Enable Internal Alarm Receiver: When selected, the internal alarm receiver will be selected instead
of handling the alarms via powerscript. Changes to this value will need a reset.
Internal Alarm Receiver Port: Sets the port to be used by the internal alarm receiver of the detector.
Enable Internal Syslog Collector: When selected, the internal syslog collector will be selected
instead of handling the syslog via powerscript. Changes to this value will need a reset.
Enable IP Watchdog: When selected, the IP Watchdog configuration page will be made available
under the Network menu.
Enable TFTP Server: Enables a TFTP server for read-only access to ELF files stored in /slave-bin on
the application drive.
Enable modbus proxy: Enables the Modbus proxy daemon on the default Modbus TCP port and

specifies the number of proxy relays supported. Setting “0” will disable the proxy dae

mon. This

value can be changed without having to reset the system
HTTPS: proxy port: Sets the port number for the HTTPS proxy daemon
HTTPS: secondary port: Sets the port number for the secondary HTTPS proxy daemon
Secondary Telnet Port: If the primary telnet port is blocked by the firewall, it is possible to configure
a second port number here. The unit is then accessed using the IP address of the unit, followed by
a colon (:) and this port number.
Enable Legacy Viewer Credentials: When selected, system variables required for legacy viewers can
be read without credentials.
Configure Syslog Sender: Provides configuration options to enable sending of syslog messages
from this unit to a specified IP address and setting which messages should be sent.

Camera Web-pages

Listed below are descriptions of the Web-

pages to be found by navigating to the “Camera“ Web

-

page.

«
...
56
57
58
59
60
...
»

Summary of Contents for FireVu Standalone


































































































Reviews:

No comments

Related manuals for FireVu Standalone

Brand: Omni Pages: 108

Brand: Unipar Pages: 10

Brand: QSee Pages: 9

Brand: Samsung Wisenet Pages: 16

Brand: Abus Pages: 18

Brand: NEO TOOLS Pages: 17

Brand: chinavasion Pages: 2

Brand: Observint Pages: 23

Brand: F&F Pages: 8

Brand: Avigilon Pages: 21

Brand: Tyco Pages: 6

FHF DSLB 20 LED

Brand: Eaton Pages: 28

SpectrAlert S1224MCW

Brand: System Sensor Pages: 4

Brand: Summit Treestands Pages: 8

theRonda S360-100 DE GR

Brand: Theben Pages: 6

Brand: Dahua Technology Pages: 56

Brand: i3 International Pages: 2

Brand: Velleman Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands