5
4. Set up Instruction
On/Off
Power on
External 12V power supply
Turn on
After plug the power, the status indicator will stay on, it means the boot is successful.
Restore to factory setting
Press and hold the function key for 5 seconds till the status indicator flashes for 20 times.
Power off
Remove power
Note:
Press and hold the function key then power on, it will enter engineering mode
Network Joining
If the device has never joined the
network
Turn on the device, and it will search for the network to join.
The network indicator stays on: Joins the network successfully
The network indicator stays off : Fail to join the network
If the device has joined the network
and it is not set to default
Turn on the device, and it will search for the previous network to join.
The network indicator stays on: Joins the network successfully
The network indicator stays off : Fail to join the network
Function Key
Press the function key and hold the
pressing for 5 seconds
The device will be set to default and turned off
The status indicator light flashes for 20 times: success
The status indicator light remains off: fail
Press the function key once
The device is in the network: The status indicator light flashes once and sends a report
The device is not in the network: The status indicator light remains off
