4
4. Set up Instruction
On/Off
Power on
Insert batteries (users may need a screwdriver to open)
Insert two sections of 3V CR2450 button batteries and close the battery cover.
Note: Require 2 button batteries to supply power at the same time.
Turn on
Press any function key and indicator flashes once meaning it is turned on
successfully.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds and green indicator flashes 20
times.
Power off
Remove Batteries.
Note:
1. Remove and insert the battery; the device memorizes previous on/off
state by default.
2. On/off interval is suggested to be about 10 seconds to avoid the
interference of capacitor inductance and other energy storage
components.
3. If press any function key and insert batteries at the same time, it will
enter engineer testing mode.
Network Joining
Never joined the network
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
(not restore to the factory
setting)
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
Suggest to check the device verification information on the gateway or consult
your platform server provider.
