7
6-3-2 Operating IR Remote Controller
Below command is use complete infrared code to control remote controller
AIR IR Apply request
Data index number - byte - IR array have all piece number.
Data Index - byte - Index of IR Data.
Data len - byte - length of IR array.
Data - var bytes - IR array data.(MAX=32bytes).
AIR IR Apply Confirm response
Status - byte - This field shall be set to SUCCESS (0x00) or FAILURE (non-zero)
Data Index - byte - Index of IR Data.
Ex.
According to the previous example, we got
NEW IR learn Confirm response is
4A000001000F6FA652000040A000000000000001D9
Downlink: 0701000F6FA652000040A000000000000001D9
Uplink returns:
080000 succeed
080100 failed
Bytes
1
1
1
1
Var(Max=32)
Cmd=0x07
Data Index
number
Data Index
Data len
Data
Bytes
1
1
1
Cmd=0x08
Status
Data Index