Chapter 12
Neobit 1012VA-II ADSL Ethernet Router User’s Guide
86
Modifying ATM VCCs
Your device may already be preconfigured with the necessary ATM
VCC properties, or the table may contain placeholder values that
you must change before using the device. Contact your ISP to
determine your ATM VCC values. Follow these instructions to
modify a preconfigured VCC:
1. From the ATM VCC Configuration page, click
in the
Actions column for the interface you want to modify.
The ATM VCC Interface – Modify page displays, as shown in
Figure 34.
Figure 35. ATM VCC Interface – Modify Page
2. Enter the new VPI and VCI values, select the MUX type, or
change the maximum number of protocols that the VCC can
carry, as directed by your ISP.
You cannot modify the interface type over which an existing
VCC operates (aal5-0, for example). If you want to change the
interface type, you must delete the existing interface, create a
new one, and select the desired interface type.
3. Click
.
4. On the confirmation page, click
to return to the
ATM VCC Configuration page.
5. Click the Admin tab, and then click
Commit & Reboot
in the
task bar.
6. Click
to save your changes to permanent
memory.
You can verify that the new settings work by attempting to access
the Internet from a LAN computer. Contact your ISP for
troubleshooting assistance.
