NetUP Streamer HDMI 1x. User manual
6
WEB NMS Operation
Use the Web interface to control NetUP Streamer HDMI 1x.
Login
Connect a personal computer and the device with net cable, and use ping command to confirm they
are on the same network segment.
Make sure that the computer’s IP address is different from the device’s IP address;
otherwise, it would cause an IP conflict
The default IP address
of NetUP Streamer HDMI 1x is
192.168.200.64
.
Thus,
set the computer’s IP
address to 192.168.200.X, where X can be from 0 to 255, except 64. Open a web browser, enter the
device’s IP address in the browser address bar and press
Enter
. If the network is configured correctly,
you will see the login interface (Figure 1).
E
nter username and password and click
LOGIN
to enter the web interface. Default username is
“admin”, default password is “admin”.
Figure-1
