NetUP Streamer HDMI 1x. User manual
11
Usage examples
To record TS files on USB
1.
Connect a USB storage device to NetUP Streamer HDMI 1x.
2.
Open the web interface and go to the
Param setting page.
Select ‘USB’ on the
Output
→
Protocol
panel.
To play from recorded TS files
1.
Connect a USB storage device to NetUP Streamer HDMI 1x.
2.
Open the web interface and go to the
Param setting page.
Select ‘USB’ on the
Input Src
panel.
Before you start playing from USB, you must first stop all output streams
Connect device over LAN
1.
Connect the device to a signal source (STB, DVD, etc.) with a signal cable or insert a USB
storage device with TS files to use as a signal source
.
2.
Make sure the source resolution is in the list of supported resolutions (see
3.
Connect NetUP Streamer HDMI 1x to a Wi-
Fi router (make sure that the
device’s IP address
and router’s IP address are in the same network segment).
4.
Connect your mobile device to the same Wi-
Fi
.
The device continues to record until the file reaches the specified size (the Time slice
parameter is the file length in minutes), and then creates a new file and continues
recording until the USB storage device runs out of free space. When the free space runs
out, the device deletes the oldest of the TS files, and continues recording
STB
/ DVD
/
Camera / USB
storage device
NetUP Streamer
HDMI 1x used as
a server
Mobile Devices
(Laptop / Tablet /
Phone / etc.)
Wi-
Fi
router
