Installation instructions Universal Device Rack Netti III Comfort HD / XHD / Mini SW 35
MD 0167UK Installation instructions - Universal device rack
08-2018
My.Netti.com Page 4 of 10
The universal device rack is supplied pre-assembled and ready to install on a
Netti III Comfort HD /
Netti III Comfort XHD and Netti Mini SW 35 cm
wheelchair. It is intended to carry medical equipment.
Before you start to install the rack please read these instructions carefully.
For mounting the universal rack on a Netti Mini SW 35 please read chapter 2.a.
After the rack has been installed this manual must be given to the wheelchair user. The user must be
warned of the risks of using this rack if the anti-tips are not turned downwards and locked into position.
If you have received this rack for retrofitting to an a wheelchair that is already in use you should first
read sections 9 and 11.
1. Introduction to the universal device rack and optional protective cover / second level:
Platform
Support tubes (for mounting to the wheelchair)
Anti -tip supports
Anti-tips
Set of 4 adjustable retaining brackets
Protective cover / second level
Inclined support plate for a respiratory device
Cut-out for oxygen cylinder
Oxygen cylinder holder
Inspection cut-out
A
E
B
C
D
Fig. 1
F
G
H
I
J
A
B
C
D
E
F
G
H
I
J