NetterVibration NED 50100, Instruction Manual

Page: 8 / 26

Technical data
8
1 type designation
2 rotary speed
3 nominal voltage
4 current
5 phases / capacity
6 serial number
7 year of manufacture
8 degree of protection
9 insulation class
10 power factor
11 power
12 nominal frequency
13 centrifugal force
14 duty cycle
The values can be found on the type plate. The type plate is located on the hous-
ing. For detailed technical data please refer to the brochure of the NED. Deviating
customer-specific type plates (special designs) are possible.
Netter
Vibration
recommends the following tightening torques [Nm]:
Type M4 M5 M6 M8 M10 M12 M16 M20 M22 M24
Fastening screws and
nuts, steel
Property class 8.8* - - 10 25 50 87 210 411 559 711
Fastening screws for XS-
unbalances, steel
Property class 12.9** - - - 42 83 146 360 710 970 1225
Fastening screws and
nuts, stainless steel 8.8 21.4 44 74 183 - - -
Terminal plate nuts, steel 1.2 2.0 3.0 6.5 13.5 - - - - -
Screws as supplied, without additional lubrication.
* coefficient of sliding friction 0.14 ** coefficient of sliding friction 0.15
Always use a torque wrench and tighten the screws crosswise.
Type M13x1 M15x1 M20x1 M25x1.5 M30x2 M45x1.5
Locking nuts
(Pos. 21) see page 20. 30 50 100 170 340 500
Type plate
Tightening
torques