20
CLI>pass
Old Password: ********
New Password: ********
Verify New Passuord : ********
Password Changed And Save Permanently!
CLI>
2. PASS Command
The pass command allows user to set or clear 12Gbps SAS JBOD enclosure password
protection feature. Once the password has been set, the user can only monitor and
access 12Gbps SAS JBOD enclosure setting by providing the correct password. The
password can accept max. 8 chars and min. 4 chars. The manufacture default password
is “00000000”.
Syntax: CLI>pass [Enter]
CLI>
CLI>lo
Logout Successful!
3. LO Command
To exit the selected 12Gbps SAS JBOD enclosure CLI shell, use the lo command.
Syntax: CLI>lo [Enter]
