Netstor NS388P-S4, User Manual, Page: 25 / 31

25
Go Top ↑
For this function, the NS388P storage must be connected to the host computer
via NS388P’s rear USB Type-B port rather than its rear RJ-45 LAN port.
(If necessary, both switch boards need command)
After executing the fdl sw command, click File on
Tera Term’s top menu, select Transfer , select
XMODEM , and select Send . Browse to the PM8535
PCIe switch firmware file, and click OK to proceed
and complete the firmware update.
fdl command
Update switch controller board ’s PM8535 PCIe switch’s firmware.
CLI Command List
Syntax: JBOF > fdl sw [enter]
lsd command
The command shows environmental information (temperature, fan, voltage)
on NS388P NVMe JBOF system.
(If necessary, both switch boards need command)
CLI Command List
Syntax: JBOF > lsd [enter]