Netscout OneTouch AT 10G, User Manual

Page: 48 / 248

OneTouch AT 10G
User Manual
46

DNS server response time limit
The last sections of the Setup Wizard let you set up network
connectivity, infrastructure/network services, network
performance, and application and protocol performance tests.
These are referred to as User Tests, and they are shown as icons
on the Test Tiers (see page 31) on the HOME screen.

Ping (ICMP)

Connect (TCP)

Web (HTTP)

File (FTP)

Wired Performance

Multicast (IGMP)

Video (RTSP)

Email (SMTP)
The entire configuration is stored in a Profile that you can easily
recall and use. See Chapter 6: "Profiles," beginning on
page 139 .
You can exit the Setup Wizard at any time before saving a Profile
by selecting the EXIT button
. Partially completed Profiles
are not saved. You can re-start the Setup Wizard later, as
described on page 42.
Network Connectivity - Wired
The first configuration section of the Setup Wizard is Wired
Network Connectivity. Here you can configure your network
settings for a wired connection, e.g. speed/duplex, PoE, and
network address.
For more information about wired network configuration, see
“Analysis” on
page 176 .
To manually configure your wired network settings without using
the Setup Wizard:
1 Tap TOOLS at the bottom left corner of the HOME screen.