Netscout OneTouch AT 10G, User Manual

Page: 194 / 248

OneTouch AT 10G
User Manual
192
5
Tap a management button ( DELETE , RENAME , EXPORT , or
IMPORT ) and complete the operation. When using EXPORT or
IMPORT, you can tap to navigate the displayed directory
structure.
Maintenance Tools
Version Information
To display software and hardware version information:
1 On the HOME screen, tap TOOLS .
2 Scroll down to the Maintenance Tools section, and tap Version
Information . The module and platform serial number, version
number, and hardware revision are shown.
Management Port
The OneTouch AT 10G management port can be set to wired or
Wi-Fi. The wired setting refers to the RJ-45 Ethernet port located
on the left side of the analyzer. The Wi-Fi setting refers to the use
of an optional Wi-Fi adapter that is connected to the analyzer’s
USB port on the right side of the device. The adapter can be
ordered separately from NETSCOUT.
The wired management port is the default management port. It
links automatically when connected to a network. It is not
necessary to run AutoTest to make either of the management
ports link. However, if you make any changes to the management
port settings, you must tap the CONNECT button for those
changes to take effect.
The Wi-Fi management port is disabled by default and needs to
be configured on the Management Port configuration screen
prior to use.
To configure the Wi-Fi management port:
1 Insert the Wi-Fi management port adapter into the OneTouch
AT’s USB port.