Locating an Access Point, Client, or Interferer
69
The Locate Interferer Screen
If you touch
Locate
from the main Interferer Events list
screen, the
Select Interferer
screen opens. Select the
interfering device type you would like to locate, and then
touch
Apply
.
If you touch
Locate
from a specific interfering device’s
Interferer Event Details
screen, the AirCheck G2 begins
attempting to locate the selected device.
The following information shows on the
Locate Interferer
screen:
Interferer Type:
The type of interfering device you are trying
to locate.
Last Seen:
The time elapsed since the device was last
detected.
Signal Strength Meter:
Visually displays the interferer’s real-
time signal level reading.
Signal Strength Line Graph:
Visually displays the interferer’s
signal level over time and the highest signal strength
recorded (high watermark).
Figure 49. Locate Interferer Screen
Sound/Mute Icon:
Press this button
to turn off the
sound. When sound is on, the icon displays in the screen
header, and AirCheck G2 emits an audible single-tone clicking