All AirCheck G2 Settings
102
the
Select iPerf Server
screen. If you have multiple Test
Accessories, select the most common battery type. This
setting is not relevant for Test Accessories running on PoE.
Thresholds
— This button is a shortcut to the
Settings >
Thresholds
screen section for iPerf Thresholds. Touch to
open the
Thresholds
settings, where you can adjust the
Target Speed, Loss Percentage, and Jitter thresholds for iPerf
test results.
NOTE:
Loss and Jitter only apply when iPerf
testing with the UDP protocol.
Touch
Apply
to save your changes to the settings.
Test Targets
Test targets are part of
Connect to Network
,
Connect to AP
,
and
AutoTest Network Tests
. The
Test Targets
screen
provides tools for you to select, add, change, and delete test
targets.
Figure 66. Test Targets Screen
