[ENG] NetPing 2/PWR-220 v3/ETH & NetPing 2/PWR-220 v4/SMS, User guide -[ENG] [2PWR,v2SMS] Device Overview: Appearance
and Basic Specifications of a Device
[ENG] [2PWR,v2SMS] Device Overview: Appearance and Basic Specifications of a Device
–
•
•
•
•
•
•
•
Picture 4
– Front panel
(
device)
Picture 5
–
Elements of a Front Panel
two ports for connecting to the Ethernet network using plugs of RJ-45 type;
«Reset» button to reset a device to default settings;
a power cord of a device with a euro plug that is inseparably connected to a device;
a jack for plugging GSM antenna (for a
device with a built-in GSM modem);
a slot for a SIM card installation (for a
device with a built-in GSM modem)
Ports for connecting to the Ethernet network have two LEDs:
CPU
– glows continiously, is a device is powered
; blinks 5-6 times when a device turns on (in the process of
loading a microprogram); blinks 15-20 times when parameters of a device are reset to default values; blinks
from time to time when a device sends packages to the Ethernet network; blinks intensively when indicating
a software updating mode.
RX
– glows if a network connection is set
(shows the presence of link) and periodically blinks when receiving
packages.
