NetModule NB3710, User Manual

Page: 72 / 211

NB3710 User Manual 4.0
5.4.2. Extended Routing
Extended routes can be used to perform policy-based routing, they generally precede
static routes.
Figure 5.21.: Extended Routing
In contrast to statis routes, extended routes can be made up, not only of a destination
address/netmask, but also a source address/netmask, incoming interface and the type
of service (TOS) of packets.
Parameter Extended Route Configuration
Source address The source address of a packet
Source netmask The source address of a packet
Destination address The destination address of a packet
Destination netmask The destination address of a packet
Incoming interface The interface on which the packet enters the system
Type of service The TOS value within the header of the packet
72