NetModule NB3700 User Manual Download Page 55

Page: 55 / 194

NB3700 User Manual 3.8

5.3.6. Serial Port

This page can be used to manage your serial ports. A serial port can be used by:

Parameter

Serial Port Usage

none

The serial port is not used

The serial port is used to open a console which can be ac-
cessed with a serial terminal client from the other side. It
will provide helpful bootup and kernel messages and spawns
a login shell, so that users can login to the system.

device server

The serial port will be exposed over a TCP/IP port and can
be used to implement a Serial/IP gateway.

SDK

The serial port will be reserved for SDK scripts.

Figure 5.17.: Serial Port Administration

An RS232 serial port is optional on NB3700.

Summary of Contents for NB3700



































































































































































































Search results

Summary of Contents for NB3700

Reviews:

Related manuals for NB3700

Brands by name

Popular brands

NetModule NB3700, User Manual

Search results

Summary of Contents for NB3700

Reviews:

Related manuals for NB3700

Brands by name

Popular brands