NetModule NB3000-Line-Hd User Manual Download Page 18

Page: 18 / 225

NB3000-Line-Hd User Manual 4.2

3.4. Interfaces

3.4.1. Overview

Nr. Label

Function

LED Indicators

LED Indicators for the different interfaces

Reset

Reboot and factory reset button

SIM 1-4

SIM 1-4, they can be assigned dynamically to any modem by con-

ﬁguration.

USB

USB 2.0 host port, can be used for software/conﬁguration updates.

ETH 1-3

FastEthernet switch ports, can be used as LAN or WAN interface.

ETH 4-5

Gigabit Ethernet switch ports, can be used as LAN or WAN interface.

MOB 1

TNC female connectors for MIMO mobile antenna 1

MOB 2

TNC female connectors for MIMO mobile antenna 2

MOB 3

WLAN 2

TNC female connectors for MIMO Mobile/WLAN antenna

Summary of Contents for NB3000-Line-Hd


































































































































































































































Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands

NetModule NB3000-Line-Hd, User Manual

Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands