NM-UTPE
YE
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
UTP Security Camera
NM-UTPEYE
Indoor Low Profile Eyeball
MAN-UTPEYE REV0703A
Interior Base
Mounts in round 4” electrical
fixtures or other openings
2.7” dia. x 2.5” deep.
Camera Lens
Factory set - rotates in either
direction to adjust focus.
Camera Eyeball
Adjusts for desired
field of view.
Mounting Ring(Not Visible)
Beneath Bezel Ring - secures
Interior Base to mounting surface.
UTP Jack
Female RJ-45 connector transmits
both power and video across CAT5
and other UTP cable types.
UTP Video Encoder built into camera
Includes UTP Video Decoder module
One Wire Video™ Installation
Uses one inexpensive UTP cable
Supports up to 1000 ft of UTP cable
Supports industry standard wiring schemes
Excellent image quality
Tough billet aluminum housing
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
FEATURES
Bezel Ring
Attaches to Interior Base and
secures Eyeball position.
Product Includes:
1. Camera Assembly (Camera Eyeball, Interior Base, Bezel Ring,
Mounting Ring, UTP Video Encoder, UTP Jack).
2. NetMedia UTP Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.
This general purpose surveillance camera utilizes a built-in NetMedia UTP Video Encoder and external UTP Video Decoder to
exchange power and video across Unshielded Twisted Pair (UTP) cable, such as CAT5. There is no need to run multiple cables to
the camera location! It mounts in round 4 inch electrical fixtures or 2.7 inch diameter holes and is viewed with a security moni-
tor or television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
UTP Decoder Video Output:
UTP Decoder Video Output Connector:
UTP Decoder Power Input:
UTP Decoder Power Connector:
UTP Decoder Size:
UTP Decoder Weight:
Bezel and Eyeball Profile:
Assembly Size:
Internal Base Size:
Mounting Ring Holes:
Assembly Weight:
Female RJ-45 jack
UTP: CAT5 or better
Up to 1000’
Proprietary
Composite
Female RCA
24V DC, 200mA
5.5mm OD, 2.1mm ID, center positive
3.2” long, 2.2” wide, 0.9” thick
3 oz.
4.6” dia. x 1.1” high
4.6” dia. x 3.3” long
2.65“ dia. x 2.5” deep
3.5” centers
1 lb.
(subject to change without notice)
3.6mm
1/3” CCD
350 lines
72˚ Horizontal
0.7 Lux F2.0
Yes
3.7mm
1/4” CCD
470 lines
54˚ Horizontal
0.5 Lux F1.2
No
3.6mm
1/3” CCD
470 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
UTP Video Encoder
Built into camera - exchanges
power and video with Decoder for
One Wire Video™ on UTP cable.
SPECIFICATIONS
B/W
Color
Day/Night Color
B/W
Color
Day/Night
Color
Camera Assembly
NM-UTPEYE-BW
NM-UTPEYE-BN
NM-UTPEYE-CW
NM-UTPEYE-CN
White
Nickel
NM-UTPEYE-HW
NM-UTPEYE-HN
Available in choice of colors:
B/W camera Color camera Day/Night Color Housing
Power Input
Connects to 24V DC wall
transformer (included)
and AC outlet.
UTP Jack
Connects to camera UTP
Jack via straight-through
wired UTP cable (T-568A).
Red LED
Indicates Power.
RCA Video Out
Connects to viewing
device such as monitor,
DVR, TV, or modulator.
UTP Video Decoder
