Installation Guide
8-Port, 12-Port, and 16-Port 10-Gigabit Ethernet
Smart Managed Pro Switch with 2 Copper/SFP+
Combo Ports
Model XS708T, XS712Tv2, and XS716T
Package contents
•
Switch
•
Power cord
•
Rubber footpads for tabletop installation
•
Rack-mount kit for rack installation
•
Installation guide
Note:
For more information about installation, see the hardware installation guide, which
you can download from
Discover and register the switch
Use the NETGEAR Insight app to register your switch.
1. On your mobile device, visit the app store, search for NETGEAR Insight, and
download the latest version of the app.
2. Open the NETGEAR Insight app.
3. If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow
the onscreen instructions.
4. Enter the email address and password for your account and tap
LOG IN
. After you log
in to your account, the switch displays in the devices list.
5. Tap
+
in the upper right corner.
6. Either use the camera on your phone to scan the serial number bar code located on
the bottom of the switch, or enter the serial number.
7. Tap
Go
.
8. Follow the onscreen instructions to add your switch to a network location.
9. The switch is registered and added to your NETGEAR account.
For information about how to configure the switch, see the user manual, which you can
download from netgear.com/support/.
Discover the IP address of the switch
An IP address is required to configure your switch. The switch gets an IP address from a
DHCP server (such as your router) by default. If your switch is not connected to a DHCP
server, use the default IP address: 192.168.0.239. If the switch is connected to a WiFi
router or access point, you can use the NETGEAR Insight app to discover the IP address of
the switch.
1. Connect your mobile device to the same WiFi network as the switch.
2. Make sure that the network connects to the Internet.
3. Launch the NETGEAR Insight app from your mobile device.
4. Log in to your account.
The current IP address of the switch displays.
Configure the switch with a static IP address
Note:
If your network uses a DHCP server, this section does not apply
.
If you are using static IP addresses in your network, configure the switch IP
address before you connect the switch to a network.
Sample connections
XS716T 10-Gigabit Ethernet Smart Managed Pro Switch
Workstation
Server
Connect the switch
ReadyNAS