XAVN2001 Powerline AV 200 Wireless-N Extender User Manual
Using the XAVN2001 Powerline Utility
2-11
v1.0, July 2010
Setting Up a Custom Network Encryption Key
When all the devices are set to the default network encryption key and are plugged in, they are
listed on the Device Settings tab. Follow these steps to set up a custom network encryption key for
all the Powerline devices:
1.
Select the
Device Settings
tab to automatically perform a scan to detect the adapter status.
Wait for the new device to be listed. A new device can be identified by its MAC address.
2.
From the
Advanced Settings
tab, click the
Security
arrow, and check the boxes next to each
device in the Device Name column.
3.
Type your network encryption key in the
Create a New Encryption Key
field.
4.
Click
Apply Security to Selected Devices
.
The utility displays a message indicating that the operation was successful.
5.
Select the
Device Settings
tab to perform a scan.
Verify that all devices are detected with your network encryption key.
For troubleshooting information, see
“Problems After Changing Network Encryption Key” in
Note:
If one or more of your Powerline devices are not listed, see
