NETGEAR WGT624 v4 User Manual Download Page 11

Page: 11 / 98

v1.0, July 2008

About This Manual

The

NETGEAR®

Super G Wireless Router WGT624 v4 User Manual

describes how to install,

configure, and troubleshoot the WGT624 v4 Super G Wireless Router. The information in this
manual is intended for readers with intermediate computer and Internet skills.

Conventions, Formats, and Scope

The conventions, formats, and scope of this manual are described in the following paragraphs:

•

Typographical conventions.

This manual uses the following typographical conventions:

•

Formats.

This manual uses the following formats to highlight special messages:

•

Scope.

This manual is written for the WGT624 v4 wireless router according to these

specifications:

Italics

Emphasis, books, CDs, URL names

Bold

User input

Fixed

Screen text and commands,

Note:

This format is used to highlight information of importance or special interest.

Tip:

This format is used to highlight a procedure that will save time or resources.

Warning:

Ignoring this type of note may result in a malfunction or damage to the

equipment.

Product version

WGT624 v4 Super G Wireless Router

Manual publication date

July 2008

Summary of Contents for WGT624 v4



































































































Search results

Summary of Contents for WGT624 v4

Reviews:

Brands by name

Popular brands

NETGEAR WGT624 v4, User Manual

Search results

Summary of Contents for WGT624 v4

Reviews:

Brands by name

Popular brands