NETGEAR WGR614 v7, Setup Manual

Page: 15 / 30

Router Setup Manual
Connecting the Router to the Internet 1-9
v1.0, 2006-01-17
Product Registration, Support, and Documentation
Register your product at
http://www.NETGEAR.com/register
. Registration is required before
you can use our telephone support service. Product updates and Web support are always available
by going to:
http://kbserver.netgear.com/
.
Documentation is available on the CD, on the support Web site, and on the documentation Web
site. When the router is connected to the Internet, click the Knowledge Base or the Documentation
link under the Web Support menu to view support information or the documentation for the router.
How to Access the Router Again Later
The configuration assistant wizard only appears when the router is in its factory default state, and
access to the router does not require a login name or password. After you configure the router (or
bypass the configuration assistant wizard), it will not appear again, and you will have to log in to
the your router to make changes to it.
To access the router using its login name and password, follow these instructions.
1. Connect to the router by typing http://www.routerlogin.net in the address field of your
browser, then click Enter .
Note:
The factory default state is restored when you use the factory reset button. See “Restoring
the Default Configuration and Password” on page 2-6 for more information on this feature.
Figure 1-8
Tip:
Connect to the router by typing any one of these three URLs in the address field of your
browser, then clicking Enter:
•
http://www.routerlogin.net
•
http://www.routerlogin.com
• http://192.168.1.1
The router will prompt you to enter the user name of admin and the password.