background image

ii

Technical Support

Please refer to the support information card that shipped with your product. By registering your 
product at www.netgear.com/register, we can provide you with faster expert technical support and 
timely notices of product and software upgrades.

NETGEAR, INC. Support Information

Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support 
information card.

E-mail: [email protected]

Web site: www.netgear.com

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to 
make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit 
layout(s) described herein.

©2003 NETGEAR, Inc. NETGEAR, the NETGEAR logo, The Gear Guy and Everybody's Connecting are 
trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. 
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or 
other countries. Other brand and product names are trademarks or registered trademarks of their respective 
holders. Information is subject to change without notice. All rights reserved

.

December 2003 

Certificate of the Manufacturer/Importer

It is hereby certified that the Model WG311 Wireless PCI Adapter has been suppressed in accordance with the 
conditions set out in the BMPT- AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, 
test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the 
notes in the operating instructions. 

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and 
has been granted the right to test the series for compliance with the regulations.

VCCI Statement

This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area 
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing 

Summary of Contents for WG311 v2












































































Reviews: