To reset the access point to factory default settings:
1. On the bottom panel of the access point, locate the recessed Reset button.
2. Using a straightened paper clip, press and hold the Reset button for at least
10 seconds.
Note: If you hold the Reset button for less than 10 seconds and then release it, the
access point restarts rather than returns to its factory default settings.
3. Release the Reset button.
The configuration is reset to factory default settings. When the reset is complete,
the access point reboots. This process takes about two minutes.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset.
Do not turn off the access point. Wait until the access point finishes restarting and
the Power/Cloud LED turns solid green or solid blue.
Use the local browser UI to reset the access point
You can use the access point’s local browser UI to return the access point to its factory
default settings.
CAUTION:
This process erases all settings that you configured in the access point.
To reset the access point to factory default settings through the local browser UI:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
User Manual
173
Manage and Maintain the Access
Point
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
