The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > General.
The General page displays.
5. Select an IGMP Snooping radio button:
•
Enable: IGMP snooping is enabled.
•
Disable: IGMP snooping is disabled. This is the default setting.
6. Click the Apply button.
Your settings are saved.
Enable or disable Ethernet LLDP
Link Layer Discovery Protocol (LLDP), as specified in IEEE 802.1AB, can provide link-layer
messages to adjacent network devices. For example, LLDP lets network devices such
as switches and management devices discover the access point in a network.
LLDP can also detect if the access point receives power through PoE. By default, LLDP
is enabled.
To enable or disable the LLDP:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 26.
The Dashboard page displays.
User Manual
145
Manage the Local Area Network
and IP Settings
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
