5. To configure the date and time, in the Date and Time Settings section, select one of
the following radio buttons:
•
Manually Set Date and Time: Specify the date and time settings by doing
one
of the following:
-
Enter the setting manually by doing the following:
a. In the Date fields, specify the year, month, and date.
b. In the Time fields, specify the hour and minutes.
Use 24-hour format.
-
Synchronize the date and time setting with the computer from which you log
in to the local browser UI of the access point by clicking the Synchronize with
PC button.
•
Automatically Get Date and Time: The access point automatically gets the date
and time from the Network Time Protocol (NTP) server that is specified in the
NTP Server field.
This is the default setting. You can specify a different NTP server from the one
that is preconfigured.
6. To configure a time zone, in the Time Zone section, select a time zone from the Time
Zone menu.
If you manually select a time zone, you can also manually configure daylight saving
time settings (see the next step).
7. To manually enable and configure daylight saving time settings, in the Time Zone
section, do the following:
a. Select the Enable Daylight Saving check box.
b. From the Start menus, select the month, day, and time that daylight saving time
must start.
c. From the End menus, select the month, day, and time that daylight saving time
must end.
8. Click the Apply button.
Your settings are saved and applied.
SNMPv1, SNMPv2, and SNMPv3
The access point supports Simple Network Management Protocol (SNMP), which lets
SNMP network management software such as HP OpenView access and manage the
User Manual
98
Maintain the access point
NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
