Log in to the AP after you complete the initial
log-in process
After you complete the initial log-in process, the AP is ready for use and you can change
the settings and monitor the traffic. To log in to the AP’s local browser UI after you
complete the initial log-in process
To log in to the AP’s local browser UI after you complete the initial log-in process:
1. Connect your computer or mobile device to the AP in one of the following ways:
•
Connect directly to the AP’s WiFi network or LAN.
•
Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use aplogin.net on page 24.
A login window displays.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The Home page displays.
User Manual
26
Install and Access the AP in Your
Network
802.11ac Wireless Access Point Model WAC104
