NETGEAR VEVG2660-1TKSAS User Manual Download

Page: 89 / 116

Manage Your Network

VDSL Voice Gateway

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED > Administration >

Backup Settings

Click the

Back Up

button.

When prompted, specify a location on your network and click the

button.

A copy of the current settings is saved in the location you specified.

Restore Configuration Settings



To restore configuration settings that you backed up:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED > Administration >

Backup Settings

Click the

Browse

button to find and select the

.cfg

file.

Click the

Restore

button.

The file is uploaded to the gateway and the gateway reboots.

WARNING:

Do not interrupt the reboot process.

Summary of Contents for VEVG2660-1TKSAS





















































































































Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands

NETGEAR VEVG2660-1TKSAS, User Manual

Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands