NETGEAR VEVG2660-1TKSAS User Manual Download

Page: 61 / 116

Specify Network Settings

VDSL Voice Gateway

Select

ADVANCED > Setup > LAN Setup

Select the radio button next to the reserved address.

Click the

Edit

button.

Change the settings.

Click the

Apply

button.

Your changes are saved.

Delete a Reserved LAN IP Address



To delete a reserved address:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Select

ADVANCED > Setup > LAN Setup

Select the radio button next to the reserved address.

Click the

Delete

button.

The address is removed.

Use the WPS Wizard for WiFi Connections

The WPS Wizard helps you add a wireless computer or device to your WiFi network without
typing the WiFi password.



To use the WPS Wizard:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://routerlogin.net

http://10.0.0.2

A login screen displays.

Enter the gateway user name and password.

The user name is

admin

. The default password is

admin

. The user name and password

are case-sensitive.

The BASIC Home screen displays.

Summary of Contents for VEVG2660-1TKSAS





















































































































Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands

NETGEAR VEVG2660-1TKSAS, User Manual

Search results

Summary of Contents for VEVG2660-1TKSAS

Reviews:

Related manuals for VEVG2660-1TKSAS

Brands by name

Popular brands