NETGEAR RT328 Getting Started Download Page 27 | Manualshive

Page: 27 / 70

NETGEAR RT328 Getting Started Download Page 27

Getting Started Using FirstGear for the Model RT328 ISDN Router

Configuring the Router Using FirstGear

3-5

Choosing Between Quick or Advanced Configuration

After you have found and selected a router using FirstGear, you can select either the Quick
Configuration procedure that leads you through various menus asking for basic information,
or you can select the Advanced Configuration procedure.

The Quick Configuration procedure can be chosen when you are using a dial-out only
configuration for simple Internet access. The Advanced Configuration procedure must be chosen
when you are using a dial in/out configuration. The Advanced configuration provides several
menus that allow you to customize every aspect of the router configuration. You can also save
an existing router configuration to your PC and download the configuration to other routers.

From the starting screen, click on either the Quick or Advanced button to proceed. Refer to

Chapter 4, “Quick Configuration for Internet Access

,” for instructions on using the Quick

Configuration. Refer to

Chapter 5, “Advanced Configuration

,” for instructions on using the

Advanced Configuration procedure.

RT328.BK Page 5 Wednesday, August 6, 1997 11:14 AM

«
...
25
26
27
28
29
...
»

Summary of Contents for RT328







































































Reviews:

No comments