Specify Network Settings
67
Orbi High-Performance
AC3000
Tri-band
WiFi
System
9.
Type the IP address of the final destination.
10.
Type the IP subnet mask for this destination.
If the destination is a single host, type
255.255.255.255
.
11.
Type the gateway IP address.
This address must be on the same LAN segment as the router.
12.
Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
13.
Click the
Apply
button.
The static route is added.
Edit a Static Route
To edit a static route:
1.
Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > Static Routes
.
The Static Routes page displays.
5.
In the table, select the radio button for the route.
6.
Click the
Edit
button.
The Static Routes page adjusts.
7.
Edit the route information.
8.
Click the
Apply
button.
Your settings are saved.
Delete a Static Route
To delete a static route:
1.
Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.