Use the WPS Wizard for WiFi connections
WPS (Wi-Fi Protected Setup) lets you connect a WPS-enabled device to your WiFi
network without typing the WiFi password. Instead, you push a button or enter a PIN
to connect.
If you use the push button method, the device that you are trying to connect must
provide either a physical button or a software button. If you use the PIN method, you
must know the PIN of the device that you are trying to connect.
Note: You cannot use the WPS Wizard to connect a device to a guest network.
Use the WPS Wizard with the push button
To use the push button method to connect a WiFi device to the your WiFi network, the
device must have either a physical button or a software button.
To use the WPS Wizard with the push button:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
5. Click the Next button.
The Add WPS Client page displays.
By default, the Push Button (recommended) radio button is selected.
6. Click the WPS button that is displayed on the page.
7. Within two minutes, go to the WPS-enabled device and use its WPS software to
connect to the WiFi network.
The WPS process automatically sets up the WPS-enabled device with the network
password when it connects. The router web interface displays a confirmation message.
User Manual
62
Manage WiFi Settings
Nighthawk AXE7800 Tri-Band WiFi 6E Router Model RAXE300
