NETGEAR R7300DST Quick Start Manual Download

Page: 7 / 29

DST Adapter LEDs

The LEDs on the DST adapter light to indicate DST adapter activity:

LED

Description

WiFi LED

Solid blue

. The DST adapter is securely paired with a WiFi

device.

Blinking blue

. The DST adapter is pairing with a WiFi device.

Off

. WiFi is disabled.

DST LED

This LED indicates when the DST adapter is connected to
the electrical outlet with the strongest link performance,
indicated by the color displayed by the LED:

•

Red

. Link rate < 50 Mbps (good).

•

Amber

. Link rate > 50 and < 80 Mbps (better).

•

Green

. Link rate > 80 Mbps (best).

•

Off

. The DST adapter did not find any other compatible

DST devices using the same encryption key.

Power LED

•

Solid green

. The DST adapter is powered on.

•

Blinking green

. The DST adapter is pairing with another

DST device.

•

Off

. The DST adapter is powered off.

Ethernet LED

•

Solid green

. A powered-on device is connected to the

Ethernet port.

•

Off

. No device is connected to this Ethernet port.

Summary of Contents for R7300DST






























Search results

Summary of Contents for R7300DST

Reviews:

Related manuals for R7300DST

Brands by name

Popular brands

NETGEAR R7300DST, Quick Start Manual

Search results

Summary of Contents for R7300DST

Reviews:

Related manuals for R7300DST

Brands by name

Popular brands