NETGEAR R6900v2 User Manual Download Page 22

Page: 22 / 229

Access the Router With the NETGEAR genie App

The genie app

is the easy dashboard for managing, monitoring, and repairing your home network from

a smartphone, tablet, or WiFi-enabled computer. The genie app can help you with the following:

•

Automatically repair common WiFi network problems.

•

Easily manage router features such as Live Parental Controls, guest access, Internet traffic meter, speed
test, and more.

•

Share and stream music or videos.

To use the genie app to access the router:

Visit the NETGEAR genie web page at

netgear.com/genie

Click the appropriate Download button.

Follow the onscreen instructions to install the app on your smartphone, tablet, or WiFi-enabled computer.

Launch the genie app.

The genie app dashboard displays.

The following figure shows the genie app dashboard for a Windows-based computer.

Connect to the Network and Access the Router

Nighthawk AC1900 Smart WiFi Router Model R6900v2

Summary of Contents for R6900v2






































































































































































































































Search results

Summary of Contents for R6900v2

Reviews:

NETGEAR R6900v2, User Manual, Page: 22 / 229

Search results

Summary of Contents for R6900v2

Reviews: