manualshive.com logo in svg

NETGEAR R6900P, User Manual

Share
Download
NETGEAR R6900P User Manual Download Page 38

Set Up an IPv6 DHCP Internet Connection

To set up an IPv6 Internet connection with a DHCP server:

1.

Launch a web browser from a computer or mobile device that is connected to the network.

2.

Enter http://www.routerlogin.net.

A login window opens.

3.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > Advanced Setup > IPv6.

The Basic Settings page displays.

5.

From the Internet Connection Type menu, select DHCP.

The router automatically detects the information in the following fields:

•

Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router’s
WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also
indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays
Not Available.

•

Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router’s
LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by
the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.

6.

(Optional) In the User Class (If Required) field, enter a host name.

Most people can leave this field blank, but if your ISP gave you a specific host name, enter it here.

Specify Your Internet Settings

38

Nighthawk AC1900 Smart WiFi Router Model R6900P

Summary of Contents for R6900P
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands