NETGEAR R6400v2 User Manual Download Page 77

Page: 77 / 178

Share USB Storage Devices Attached to the Router

AC1750

Smart WiFi Router

Click the

Create Network Folder

button.

If this page does not display, your web browser might be blocking pop-ups. If it is, change
the browser settings to allow pop-ups.

In the

USB Device

menu, select the USB drive.

Click the

Browse

button and in the

Folder

field, select the folder.

In the

Share Name

field, type the name of the share.

In the

Read Access

menu and the

Write Access

menu, select the settings that you want.

The user name (account name) for All–no password is guest. The password for admin is
the same one that is used to log in to the router. By default, it is password.

10.

Click the

Apply

button.

The folder is added on the USB device.

Edit a Network Folder on a USB Drive

You can add network folders on the USB storage device.



To edit a network folder:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands