NETGEAR R6400v2 User Manual Download Page 19

Page: 19 / 178

Connect to the Network and Access the Router

AC1750

Smart WiFi Router

Contact your ISP to verify the correct configuration information.

Read

Chapter 14, Troubleshooting

If problems persist, register your NETGEAR product and contact NETGEAR technical
support.

Log In to the Router

When you first set up your router, NETGEAR genie automatically starts when you launch an
Internet browser on a computer that is connected to the router. If you want to view or change
settings for the router, you can use genie again.



To log in to the router:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Change the Language

By default, the language is set as Auto.



To change the language:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

In the upper right corner, select a language from the menu.

When prompted, click the

button to confirm this change.

The page refreshes with the language that you selected.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands