NETGEAR R6400v2 User Manual Download Page 154

Page: 154 / 178

Use VPN to Access Your Network

154

AC1750

Smart WiFi Router



To allow VPN clients to use your home Internet service:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Advanced Setup > VPN Service

The VPN page displays.

Select the

Enable VPN Service

radio button.

Scroll down to the Clients will use this VPN connection to access section, and select the

All

sites on the Internet & Home Network

radio button.

When you access the Internet with the VPN connection, instead of using a local Internet
service, you use the Internet service from your home network.

Click the

Apply

button.

Your settings are saved.

Click

For Windows

For Non Windows

button and download the configuration files for

your VPN clients.

Unzip the configuration files and copy them to the folder where the VPN client is installed on

your device.

For a client device with Windows 64-bit system, the VPN client is installed at

C:\Program files\OpenVPN\config\

by default.

Block VPN Client Internet Access in the Router

By default, the router is set up to allow VPN connections only to your home network, not to
the Internet service for your home network. If you changed this setting to allow Internet
access, you can change it back.



To allow VPN clients to access only your home network:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands