NETGEAR R6400v2 User Manual Download Page 112

Page: 112 / 178

Specify Network Settings

112

AC1750

Smart WiFi Router

In the

Ending IP Address

field, type the number at the end of the range of IP

addresses.

This IP address must be in the same subnet as the router.

Click the

Apply

button.

Your settings are saved.

The router delivers the following parameters to any LAN device that requests DHCP:

•

An IP address from the range that you defined

•

Subnet mask

•

Gateway IP address (the router’s LAN IP address)

•

DNS server IP address (the router’s LAN IP address)

Disable the DHCP Server Feature in the Router

By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default
gateway addresses to all computers connected to the LAN. The assigned default gateway
address is the LAN address of the router.

You can use another device on your network as the DHCP server, or specify the network
settings of all your computers.



To disable the DHCP server feature in the router:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Setup > LAN Setup

The LAN Setup page displays.

Clear the

Use Router as DHCP Server

check box.

Click the

Apply

button.

(Optional) If this service is disabled and no other DHCP server is on your network, set your

computer IP addresses manually so that they can access the router.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands